Sunday, March 13, 2016

Vintage Sew Machine Quilt Tutorial

I finally got around to writing up my notes for this tutorial for my Vintage Sewing Machine Quilt for those of you that were interested in the pattern. It matches the table runner I did late last year.
Cynthia's Ark Vintage Sewing Machine Quilt


Materials                                                                   1 Thimble Pleasures Sewing Machine Panel                           15 cm Tape Measure fabric                                           15 cm scissors fabric                                            65 cm Thimble fabric                                        80 cm black fabric                                       50cm cream fabric    
Cutting                                                                   Cut your sewing machine panel into 2 equal strips.              Cut a 5 ½’ strip from each of the tape measure, scissor and thimble fabrics and cut 5 x 5 ½’ from each strip for a total of 15 squares.                                                                Cut 10 x 1 ½’ strips from the black fabric and cross cut 30 x 5 ½’ strips and 30 x 7 ½’ strips.                                            Cut 3 x 1 ¾’ strips from the cream and cross cut 12 x 7 ½’ strips for the blocks and cut another 8 x 1 ¾’ strips for sashing strips.   Cut 5 x 4’ strips from the thimble fabric.                                Cut 5 x 2 ½’ strips from the black fabric for your binding.
Piecing                                                                   To make the blocks sew a 5 ½’ black strip to both side of your 15 x 5 ½’ squares. Press seam to the square.

Sew a 7 ½’ black strip to the top and bottom of your block.  Press to the black strip this time.

 Make 15 blocks.
Arrange the blocks into 3 rows of 5. Refer to quilt picture if you want to the same arrangement as I did but you can arrange them how you like them. Sew a cream 7 1/2 ‘strip in between the blocks as per picture below. Repeat with your other 2 rows.

Measure your pieced strips and cut 6 x 1 ¾’ cream strips to that measurement and sew one to the top and one to the bottom of your row of blocks. Press to the cream strip.
Trim your 2 machine panel’s strip to the same measurement of your block rows.  Arrange your rows as per pictures and sew the 5 rows together. Press towards the sewing machine panel.

Sew your remaining 3 x 1 ¾’ cream strip together in to a long strip for your side borders. Press seams open.  Measure your quilt through the middle top to bottom and cut 2 cream strips to that length and sew them to the sides of your quilt.

Next is the border and sew 3 x 4’ border strips together lengthwise.  Press seams open.  Now cut 2 strips the same length as you cut for your cream side sashing strips.  Sew your border strips to the sides of your quilt.  Press to the border. Sew the remaining part strip to your last 2 border strips. Press seams open. Measure your quilt through the middle sideway this time and cut 2 strips to that measurement. Sew them to the top and bottom of the quilt. Press toward the border. This completes your top.


Quilting                                                                                              Layer your backing fabric out (wrong side up) then the batting goes on top followed by the quilt top (right side up). Make sure you smooth out any lumps and baste with safety pins or use your preferred method. Quilt as you wish. I just stitched in the ditch for this one.  There a lots of options for you.

Backing
For the backing I have used a piece of Thimble Pleasures Sewing Sayings 155cm cut it off centre so I have 2 pieces x 155 cm and cut 2 x 12’ strips of scissor fabric joined them lengthwise and sewing the 3 pieces together with the scissor material in the middle. (Not included in the materials list)



 Binding                                                                                                   To make the binding join the strips end to end with a 45 degree mitred seam, press the seams open. Press the binding strip in half lengthwise with the wrong sides facing. Stitch the binding the front of the quilt, mitring the corners as you go and mitre the binding ends together to complete and sew in place. Trim the backing and batting to ½’ from your binding stitching line. Fold the binding over the edge to the back of the quilt and slip stitch it in place with a matching coloured thread. Don’t forget to finish your quilt with a label on the back.
Finished size: 49 1/2'  x 58’ (126 x 148 cm)

This quilt was designed by Cynthia Woodham for Cynthia’s Ark. This pattern is for personal use only, not to be copied in any form without the permission from the designer. Copyright © Cynthia’s Ark 2016
All the fabrics used in the pattern are available at www.cynthiasark.com.au and there is a kit available (Kit includes all the fabric for the quilt top and binding only) to purchase while stocks last. You will need to purchase backing fabrics separately.


Printer friendly version (PDF) 

Until Next Time 
Keep Stitching
Cynthia

No comments: